To the top

New Zealand International

Product Tabs

Product Details
SCNR Ring-Shank Connector Nail
SCNR Head With Embossed "≠"
SCNR Head With Embossed "≠"
SCNR Illustration
SCNR Illustration
SCNR Ring-Shank Connector Nail - Collated
SCNR Ring-Shank Connector Nail - Collated
SCNR & LUS Joist Hangers
SCNR & LUS Joist Hangers

Strong‑Drive® connectors have been designed and tested with specific types of nails, which are generally referred to as Structural Connector Nails (SCN). The specified nail size, type and quantity must be installed in the correct holes of the connector or strap to achieve the published loads for the hardware. The dimensions and bending yield strength characteristics needed for nails used in Simpson Strong-Tie connectors. 

The SCNR Ring-Shank Connector Nail has been developed as the optimum nail for connector products. Feature with "Rings" on the shank providing superior holding power. Choose this 316 Stainless Steel connector nail when using stainless steel connectors. It is the best choice for achieving maximum load values in Simpson Strong‑Tie® structural connectors. This nail is available for both hand-drive and CCN64 Collated Connector Nailer.

Material

316 Stainless Steel 

Features & Benefits
  • Full round head with embossed "≠" identifier
  • Annular Threads or "rings" on the shank increase withdrawal capacity identification
  • Diamond Point provides lower driving resistance
  • Collated version with 33° collation angle help with quick alignment through CCN64 Collated Connector Nailer
  • Paper tape strip, 22 nails per strip
Applications
  • Simpson Strong‑Tie® Connectors
Model No. Table

Specifications - Hand Drive

Model No.

Guage

Size

Shank

Point

Head Type

Material & Finish

Box Qty

 

SSNA8D

#8

38mm x 3.32mm

Annular-Ring

Diamond Point

Full Round

316 Stainless Steel

147

SSNA10D

126

SSNA10D5

#10

38mm x 3.75mm

630

SSA10DD

66

SSA10D5

64mm x 3.75mm

330

Specifications - CCN64 Collated Connector Nailer

Model No.

Guage

Size

Shank

Point

Head Type

Material & Finish

Strip

Box Qty

These coated fasteners possess a level of corrosion resistance that makes them suitable for use in some exterior and corrosive environments and with some preservative-treated timber.
For applications in higher-exposure applications, consider Type-300 series stainless-steel fasteners for superior corrosion resistance. Bit(s) included with every box of screws.
Pre-drilling and countersink may be necessary at ends, butt joints, and on applications where denser material is used. Follow board manufacturers recommendations where applicable.

T10A150MCN

#8

38mm x 3.32mm

Annular-Ring

Diamond Point

Full Round

Hot-Dip Galvanised

33° Collation
22 nails per strip

1500

T9A150MCN

38mm x 3.75mm

T9A250MCN

#10

64mm x 3.75mm

1000

Brochures & Catalogues
Technical Data & Docs

Technical Data Sheets

PDF icon Technical Data Sheet - SCNR

Warranty

Warranty

Masterspec
Alternative Products

Alternative Products

CNA Ring-Shank Connector Nail

CNA Ring-Shank Connector Nail is tested and approved for use with Simpson Strong-Tie joist hangers, brackets, straps and nail plates.

CSA Loose

The CSA is a self-drilling Flat Head screw with a Type-17 Point tip suitable for installing construction connectors to timber structures. 

Inspiration
Request a Demo

Request a Demo/Sample

Experience the innovation design of Simpson Strong-Tie's products and how we can help you build safer, stronger structures. Please fill out your details and submit the form below. We’ll be in touch to schedule a time to talk and give you a personal demo of Simpson Strong-Tie products.

Request a Demo/Sample

Experience the innovation design of Simpson Strong-Tie's products and how we can help you build safer, stronger structures. Please fill out your details and submit the form below. We’ll be in touch to schedule a time to talk and give you a personal demo of Simpson Strong-Tie products.

Structural Connections

 

Unmatched Quality from the Truss to the Foundation

With nearly 60 years of field and R&D experience, Simpson Strong-Tie® timber connectors are manufactured to the industry's highest standards. From framing angles to straps to heavy-duty joist hangers, we offer the most diverse product line so that you have the right product for the job.

Simpson Strong-Tie® connectors offer unmatched quality with laboratory and field testing, and are backed by our uncompromising commitment to customer service. As the company that built the connector industry, you can count on Simpson Strong-Tie® to work closely with builders, engineers and building officials to deliver innovative, building code-compliant solutions to help build safer, stronger structures economically. Download the Timber Connectors NZS 3604 Catalogue.

Timber Connectors

From testing to service to availability, everything we do is engineered to ensure your project's success. With every product, you know you are getting the quality, value, service and on-time delivery that we have built our reputation on for the past 60 years.

From straps and ties to joist hangers and much more, Simpson Strong-Tie® structural connectors increase the strength and safety of timber-frame structures. Each connector is unique to Simpson Strong-Tie and is designed for specific applications without the need to adapt metal plating to suit a connection. Download the Timber Construction Connectors Catalogue.

Steel Frame Connectors

From fully tested and engineered connectors and clips Simpson Strong-Tie® provides comprehensive structural solutions for cold-formed steel construction. From steel-to-steel connections to full-scale lateral solutions and curtain wall connectors, we remain committed to developing new technology that helps to advance the cold-formed steel industry.

Find out how Simpson Strong-Tie timber connectors can help you build the right way every day. Download the Cold-Fromed Steel Construction Connectors Catalogue.