AT-HP® Blue is a high‑performance chemical anchor for threaded rod and rebar into concrete and masonry. Fast curing, two‑part adhesive, that changes colour from blue to grey when fully cured.
Titen HD® Heavy Duty Screw Anchor is the original high-strength screw anchor for use in cracked and uncracked concrete, as well as uncracked masonry. The Titen HD® demonstrates industry-leading performance.
The WA Wedge Anchor ia a non-bottom-bearing, wedge-style expansion anchor for use in solid concrete or grout-filled masonry. Threaded studs are set by tightening the nut to the specified torque.
Titen® screws are hardened screws for attaching all types of components to concrete and masonry.
SET-XP Epoxy Anchoring Adhesive is a high-strength formula for anchoring and doweling in cracked and uncracked concrete and masonry applications.
EDT22S Epoxy Adhesive Dispensing Tool
The EDT22S epoxy adhesive tool features a steel carriage and is engineered for high-volume, continuous use.
DT300 Acrylic Adhesive Dispensing Tool
The DT300 is a high-quality, standard size caulking tool for single cartridge adhesives. The DT300 features a steel carriage for ultimate durability and is engineered for continuous, high-volume use.
Screen tubes are used in hollow base material applications to contain adhesive around the anchor and prevent it from running into voids, such as hollow block and brick.
Hole Cleaning - Blow-out Pump
Manual blow pump ideal for cleaning dust from drilled holes prior to applying anchoring adhesive or installing mechanical anchors to ensure best results.
The ETI Super-Low Viscosity Injection Epoxy is a two-component (dual cartridge), high-solids formulations for the injection into cracks in concrete.
CIP-LO is a low-odour, fast-curing epoxy paste-over used to seal cracks and secure injection ports at the surface of concrete substrates prior to implementing an epoxy or urethane foam injection repair.
The E-Z-Click™ Injection System is comprised of a specially designed fitting and ports that take the mess out of your repair project while allowing you to work faster.
The P27SL strip loads work with Simpson Strong‑Tie PT-27 Powder-Actuated Tool and most other .27 calibre strip load tools. 0.27 Calibre Plastic, 10-Shot Strip Loads. Available in levels 4–6.
The PDPA is a hardened-steel, powder-actuated fastener designed to fasten building components to concrete, masonry and steel. The PDPA consists of a fastener with a 7.6mm Flat Head, 3.98mm shank diameter, Ballistic Point.
The PDPAWL is a hardened-steel, powder-actuated washered pin designed to fasten building components to concrete, masonry and steel.
The PDPAS is a 10-pin collation of hardened-steel PDPA pins designed to fasten building components to concrete, masonry and steel. The PDPA consists of a fastener with a 7.6mm Flat Head, 3.98mm shank diameter, Ballistic Point.
E5 Reinforced Angle Bracket is suitable for structural applications in framing and timber-frame houses for general connecting of timber at 90° angles. Typical applications include fixing trusses, studs, purlins, beams and posts.
Simpson Strong‑Tie offers a wide variety of holdown devices designed and tested to address many applications and load demands. The DTT Tension Tie & Holdown is designed for lighter‑duty holdown applications on single or double studs.
Simpson Strong‑Tie offers a wide variety of holdown devices designed and tested to address many applications and load demands.
The MASA Bottom Plate Anchor provides a time‑saving alternative to M12 and M16 cast‑in‑place anchor bolts on 45mm bottom plates.
The Strong-Rod™ Anchor Tiedown Systems (ATS) offer safe and tested continuous rod tiedown solutions for multi-storey, timber-frame construction in seismic and high-wind areas.
Easy, Fast, Reliable and Superior load performance
The Strong-Drive® SDWS Timber SS Screw is a 7mm-diameter, Type 316 stainless steel, heavy-duty structural fastener suitable for marine and coastal applications where severe-corrosion resistance is a necessity.
With nearly 60 years of field and R&D experience, Simpson Strong-Tie® timber connectors are manufactured to the industry's highest standards. From framing angles to straps to heavy-duty joist hangers, we offer the most diverse product line so that you have the right product for the job.
Simpson Strong-Tie® connectors offer unmatched quality with laboratory and field testing, and are backed by our uncompromising commitment to customer service. As the company that built the connector industry, you can count on Simpson Strong-Tie® to work closely with builders, engineers and building officials to deliver innovative, building code-compliant solutions to help build safer, stronger structures economically. Download the Timber Connectors NZS 3604 Catalogue.
From testing to service to availability, everything we do is engineered to ensure your project's success. With every product, you know you are getting the quality, value, service and on-time delivery that we have built our reputation on for the past 60 years.
From straps and ties to joist hangers and much more, Simpson Strong-Tie® structural connectors increase the strength and safety of timber-frame structures. Each connector is unique to Simpson Strong-Tie and is designed for specific applications without the need to adapt metal plating to suit a connection. Download the Timber Construction Connectors Catalogue.
Steel Frame Connectors
From fully tested and engineered connectors and clips Simpson Strong-Tie® provides comprehensive structural solutions for cold-formed steel construction. From steel-to-steel connections to full-scale lateral solutions and curtain wall connectors, we remain committed to developing new technology that helps to advance the cold-formed steel industry.
Find out how Simpson Strong-Tie timber connectors can help you build the right way every day. Download the Cold-Fromed Steel Construction Connectors Catalogue.