IUSE Face Fix I-Joist Hanger

Product Tabs

Product Details

IUSE

IUSE Illustration

The IUSE Face Fix I-Joist Hanger is a hybrid hanger that incorporates the advantages of a face mount and top mount hanger. Installation is fast with the Strong‑Grip™ seat, easy‑to‑reach face nails and self‑jigging locator tabs. Nailing is done on the lateral flanges after pre-positioning the connectors with speed prongs.

Please check the Corrosion Information to see if it is suitable for your application.

Material

Carbon Steel 1.2mm thick

Finish

Z275 Galvanised

Features & Benefits

This hanger incorporates the Strong‑Grip™ seat which secures the I‑joist without the need for any fasteners
Positive angle nailing (PAN) minimises splitting of the joist flanges
Engineered swages for extra strength and to minimise deflections
Top flanges make installation easier and quicker
Speed Prongs help to temporarily position and secure the connector for easier and faster installation
Available with a wide range of I-Joist sizes

Installation

Use all specified fasteners
Position I‑joist into hanger and snap into place. No joist nailing required. Some models have triangle and round header nail holes. To achieve Max. download, fill both round and triangle holes
Locator tabs are not structural. They may be bent back to adjust for hanger placement
I‑joists with web stiffeners or rectangular sections can be used with the installation of 2 – 38mm x 3.75mm nails into the optional triangle joist nails

Model No. Table

Model No.	Joist Size (mm)		Dimensions (mm)			Fasteners (No. – Length x Dia.,mm)		Design Capacity (kN)
	Width	Height	H	W	B	Face5	Joist	Download
	Width	Height	H	W	B	Face5	Joist	Floor (k1 = 0.8)	Roof (k1 = 0.8)
IUSE199/ 48	45	200	199	48	51	10 – 38 x 3.75	2 – 38 x 3.75	4.37	4.37
IUSE239/ 54	51	240	239	54	51	14 – 38 x 3.75	2 – 38 x 3.75	5.29	5.29
IUSE299/ 54	51	300	299	54	51	16 – 38 x 3.75	2 – 38 x 3.75	5.29	5.29
IUSE239/ 66	63	240	239	66	51	14 – 38 x 3.75	2 – 38 x 3.75	4.91	4.91
IUSE244/ 66		245	244	66	51	14 – 38 x 3.75	2 – 38 x 3.75	5.83	5.83
IUSE299/ 66		300	299	66	51	16 – 38 x 3.75	2 – 38 x 3.75	5.29	5.29
IUSE239/ 73	70	240	239	73	51	14 – 38 x 3.75	2 – 38 x 3.75	5.83	5.83
IUSE299/ 73	70	300	299	73	51	16 – 38 x 3.75	2 – 38 x 3.75	5.29	5.29
IUSE199/ 92	90	200	199	92	51	10 – 38 x 3.75	2 – 38 x 3.75	4.29	4.29
IUSE239/ 92		240	239	92	51	14 – 38 x 3.75	2 – 38 x 3.75	5.98	5.98
IUSE299/ 92		300	299	92	51	16 – 38 x 3.75	2 – 38 x 3.75	5.29	5.29
IUSE359/ 92		360	359	92	51	20 – 38 x 3.75	2 – 38 x 3.75	6.86	6.86
IUSE399/ 92		400	399	92	51	22 – 38 x 3.75	2 – 38 x 3.75	6.86	6.86
Design Capacity is the lesser of (1) the Characteristic Capacity multiplied by the NZ Strength Reduction Factor (φ), and applicable the k modification factors following NZS 3603 and (2) the Serviceability Capacity which is the load at 3.2mm joint slip. Design Capacity is the minimum of test data and structural joint calculation. The Strength Reduction Factor (φ) is 0.80 for nails in lateral loading. Duration of Load Factor (k1) is as shown. Reduce Duration of Load Factor where applicable. Capacities may not be increased. Timber species for joint design is seasoned Radiata Pine, which is New Zealand Joint Group J5 per NZS 3603 Table 4.1. The Design Capacities may be multiplied by 1.3 when 75mm x 3.75mm face nails are used. The Design Uplift Capacity is 0.52kN for New Zealand when two joist nails are installed.

Brochures & Catalogues

Brochures and Catalogues

Flyer - Engineered Structural Connections

Catalogue - Timber Connectors NZS 3604

Installation Guides

IUSE Installation Guides

Technical Data & Docs

Technical Data Sheets

Technical Data Sheet - IUSE

Report

ETA-17-0554

Warranty

CAD Library

IUSE_Detail_Face-Fix-I-Joist-with-Web-Stiffeners_preview.jpg

Download

jpg:

IUSE_Detail_Face Fix I-Joist with Web Stiffeners.jpg

dxf:

IUSE_Detail_Face Fix I-Joist with Web Stiffeners.dxf

dwg:

IUSE_Detail_Face Fix I-Joist with Web Stiffeners.dwg

PDF:

IUSE_Detail_Face Fix I-Joist with Web Stiffeners.pdf

IUSE_Detail_Face-Fix-I-Joist_preview.jpg

Download

jpg:

IUSE_Detail_Face Fix I-Joist.jpg

dxf:

IUSE_Detail_Face Fix I-Joist.dxf

dwg:

IUSE_Detail_Face Fix I-Joist.dwg

PDF:

IUSE_Detail_Face Fix I-Joist.pdf

IUSE_Detail_Face-Fix-I-Joist_Level_preview.jpg

Download

jpg:

IUSE_Detail_Face Fix I-Joist_Level.jpg

dxf:

IUSE_Detail_Face Fix I-Joist_Level.dxf

dwg:

IUSE_Detail_Face Fix I-Joist_Level.dwg

PDF:

IUSE_Detail_Face Fix I-Joist_Level.pdf

IUSE_3D_Preview.jpg

Download

jpg:

IUSE_3D.jpg

RFA:

IUSE299-92_3d_Cad.rfa

Download Full Set (5.85 MB)

Masterspec

Alternative Products

BA Top Fix I-Joist Hanger

The BA Top Fix I-Joist Hanger is designed to be used where a heavy load/connector is required. It is cost-effective and used for structural composite lumber and high-capacity I-joists.

IUC Face Fix Concealed Joist Hanger

The IUC Face Fix Concealed Joist Hanger is a face‑mounted concealed flange hanger on solid timber sections. Ideal for end of ledger/header or post conditions, the IUC also provides cleaner lines for exposed conditions such as overhead decks.

LUS Double Shear Joist Hanger

Joist hangers are designed to provide support underneath the joist, rafter or beam to provide a strong a connection. The LUS Double Shear Joist Hanger values engineering at its finest. All hangers in the LUS series have Double-Shear Nailing.

SAE Heavy Duty Face Fix Joist Hanger

The SAE Face Fix Joist Hanger is a heavy-duty hanger designed for applications requiring additional strength.

Inspiration

IUSE_Application_01.jpg

IUSE_Application_00.jpg

IUSE_Application_02.jpg

IUSE_Application_03.jpg

IUSE_Application_04.jpg

Request a Demo

Request a Demo/Sample

Structural Connections

Unmatched Quality from the Truss to the Foundation

With nearly 60 years of field and R&D experience, Simpson Strong-Tie^® timber connectors are manufactured to the industry's highest standards. From framing angles to straps to heavy-duty joist hangers, we offer the most diverse product line so that you have the right product for the job.

Simpson Strong-Tie^® connectors offer unmatched quality with laboratory and field testing, and are backed by our uncompromising commitment to customer service. As the company that built the connector industry, you can count on Simpson Strong-Tie^® to work closely with builders, engineers and building officials to deliver innovative, building code-compliant solutions to help build safer, stronger structures economically. Download the Timber Connectors NZS 3604 Catalogue.

Timber Connectors

From testing to service to availability, everything we do is engineered to ensure your project's success. With every product, you know you are getting the quality, value, service and on-time delivery that we have built our reputation on for the past 60 years.

From straps and ties to joist hangers and much more, Simpson Strong-Tie^® structural connectors increase the strength and safety of timber-frame structures. Each connector is unique to Simpson Strong-Tie and is designed for specific applications without the need to adapt metal plating to suit a connection. Download the Timber Construction Connectors Catalogue (2016-2018).

Steel Frame Connectors

From fully tested and engineered connectors and clips Simpson Strong-Tie^® provides comprehensive structural solutions for cold-formed steel construction. From steel-to-steel connections to full-scale lateral solutions and curtain wall connectors, we remain committed to developing new technology that helps to advance the cold-formed steel industry.

Find out how Simpson Strong-Tie timber connectors can help you build the right way every day. Download the Cold-Fromed Steel Construction Connectors Catalogue.

IUSE Face Fix I-Joist Hanger