To the top

New Zealand International

Home / Products / CBT Concealed Beam Tie

CBT Concealed Beam Tie

Product Tabs

Product Details
CBT2Z
CBT2Z
CBT2Z Illustration
CBT2Z Illustration
CBT4Z
CBT4Z
CBTZ Steel Dowel
CBTZ Steel Dowel

The CBT Concealed Beam Tie is part of our concealed structural connector range, which combines structural strength with invisibility. Designed to connect horizontal beams atop a vertical post, the CBT continues the structural load path into the foundation through the CPT. The cylindrical design allows installations with a common drill bit. The CBT is available in two models designed to connect beams and posts of a variety of sizes. It is part of a concealed connector system that includes the CPT and CJT.

Please check the Corrosion Information to see if it is suitable for your application.

Material

Carbon Steel 2.7mm thick

Finish

ZMAX® Galvanised

Features & Benefits
  • Manufactured in heavier gauge steel for a stronger connection 
  • Flattened sides enable installer to lay part on beam or post to mark where holes need to be drilled
  • Locator tabs provide proper dimensional layout of dowel pin holes
  • Clear markings distinguish which end installs into the post and which goes into the beam to help reduce installer error
  • Tested and load-rated engineering data available
  • Suitable for Glulam and solid sawn timber
  • Required dowel pins included
Installation
  • Use all specified fasteners
  • The CBT2Z requires a minimum 140mm deep beam
  • The CBT2Z Kit comes complete with 83mm dowels
Model No. Table

Model No.

Post Size Min. (mm)

Beam Size Min. (mm)

Dimensions (mm)

Dowel

Design Capacity (kN)

D

H

Qty

Dia. x L

Continuous Beam

End of Beam

Post

Beam

Uplift
k1 = 1.0

Lateral
k1 = 1.0

Uplift
k1 = 1.0

Lateral
k1 = 1.0

CBT2Z-KT

90 x 90

140 x 90

32

254

2

2

1/2” (12.5mm) x 83mm

13.9

3.1

7.3

2.5
  1. Design Capacity is the lesser of (1) the Characteristic Capacity multiplied by the Australian Capacity Factor (φ) or the NZ Strength Reduction Factor (φ), and applicable the k1 modification factors following AS 1720.1 or NZS3603 and (2) the Serviceability Capacity which is the load at 3.2 mm joint slip. Design Capacity is the minimum of test data and structural joint calculation.
  2. For Australia, the Capacity Factor (φ) is 0.85 for nails and screws for structural joints in a Category 1 application. Reduce tabulated values where other Category applications govern.
  3. For NZ, the Strength Reduction Factor (Ø) is 0.7 for ‘other types’ of fasteners for structural joints.
  4. Duration of Load Factor (k1) is as shown. Reduce Duration of Load Factor (k1) where applicable. Capacities may not be increased.
  5. Timber species for joint design is seasoned Radiata Pine, which is Australia Joint Group JD4 per AS 1720.1 Table H2.4. Or NZ Joint Group J5 as per NZS3603 Table 4.1.
  6. Lateral loads is in the direction parallel to the beam.
  7. Lag or carriage bolts are not permitted.
  8. Structural composite timber columns have sides that show either the wide faces or the edges of the timber strands/veneers. Values in the table reflect dowel installation into the wide face.
Brochures & Catalogues

Brochures and Catalogues

PDF icon Flyer - CBT, CJT, CPT Concealed TiePDF icon Flyer - Engineered Structural ConnectionsPDF icon Catalogue - Timber Connectors NZS 3604
Installation Guides

Installation Guides

PDF icon CBT Installation Guides
Technical Data & Docs

Technical Data Sheets

PDF icon Technical Data Sheet - CBT

Report Links

ER_280

Warranty

Warranty

CAD Library

Download

jpg: 
Image icon CBT2Z_Detail_Beam-to-Post Connection.jpg
dxf: 
Binary Data CBT2Z_Detail_Beam-to-Post Connection.dxf
dwg: 
File CBT2Z_Detail_Beam-to-Post Connection.dwg
PDF: 
PDF icon CBT2Z_Detail_Beam-to-Post Connection.pdf

Download

jpg: 
Image icon CJT-CBT_Detail_Concealed Corner.jpg
dxf: 
Binary Data CJT-CBT_Detail_Concealed Corner.dxf
dwg: 
File CJT-CBT_Detail_Concealed Corner.dwg
PDF: 
PDF icon CJT-CBT_Detail_Concealed Corner.pdf

Download

jpg: 
Image icon CBT2Z_3D.jpg
RFA: 
Binary Data CBT2Z-KT_3d_Cad.rfa
Package icon Download Full Set (1.65 MB)
Masterspec
Alternative Products

Alternative Products

E5_Reinforced Angle Bracket

E5 Reinforced Angle Bracket

E5 Reinforced Angle Bracket is suitable for structural applications in framing and timber-frame houses for general connecting of timber at 90° angles. Typical applications include fixing trusses, studs, purlins, beams and posts.

A21 A23 Reinforced Angle Bracket

The A21 and A23 Reinforced Angle Brackets provide a way to make a straight angle of 90° connection. The A21, A23 L shape angles are load rated, providing the correct thickness and number of fasteners.

A35

A34 A35 Reinforced Angle Bracket

The versatile A34 and A35 Reinforced Angle Brackets provide a way to make a straight angle of 90° connection. The A35 Angle Bracket’s exclusive bending slot allows instant, accurate field bends for two and three-way ties.

Inspiration

Inspiration

CBT_Application_01.jpg

Request a Demo

Request a Demo/Sample

Experience the innovation design of Simpson Strong-Tie's products and how we can help you build safer, stronger structures. Please fill out your details and submit the form below. We’ll be in touch to schedule a time to talk and give you a personal demo of Simpson Strong-Tie products.

* Start typing address and select from the autocomplete.

Privacy policy

Request a Demo/Sample

Experience the innovation design of Simpson Strong-Tie's products and how we can help you build safer, stronger structures. Please fill out your details and submit the form below. We’ll be in touch to schedule a time to talk and give you a personal demo of Simpson Strong-Tie products.

* Start typing address and select from the autocomplete.

Privacy policy

Structural Connections

 

Unmatched Quality from the Truss to the Foundation

With nearly 60 years of field and R&D experience, Simpson Strong-Tie® timber connectors are manufactured to the industry's highest standards. From framing angles to straps to heavy-duty joist hangers, we offer the most diverse product line so that you have the right product for the job.

Simpson Strong-Tie® connectors offer unmatched quality with laboratory and field testing, and are backed by our uncompromising commitment to customer service. As the company that built the connector industry, you can count on Simpson Strong-Tie® to work closely with builders, engineers and building officials to deliver innovative, building code-compliant solutions to help build safer, stronger structures economically. Download the Timber Connectors NZS 3604 Catalogue.

Timber Connectors

From testing to service to availability, everything we do is engineered to ensure your project's success. With every product, you know you are getting the quality, value, service and on-time delivery that we have built our reputation on for the past 60 years.

From straps and ties to joist hangers and much more, Simpson Strong-Tie® structural connectors increase the strength and safety of timber-frame structures. Each connector is unique to Simpson Strong-Tie and is designed for specific applications without the need to adapt metal plating to suit a connection. Download the Timber Construction Connectors Catalogue (2016-2018).

Steel Frame Connectors

From fully tested and engineered connectors and clips Simpson Strong-Tie® provides comprehensive structural solutions for cold-formed steel construction. From steel-to-steel connections to full-scale lateral solutions and curtain wall connectors, we remain committed to developing new technology that helps to advance the cold-formed steel industry.

Find out how Simpson Strong-Tie timber connectors can help you build the right way every day. Download the Cold-Fromed Steel Construction Connectors Catalogue.