To the top

New Zealand International

Home / Products / VT-HP High Performance Chemical Anchor

VT-HP High Performance Chemical Anchor

Product Tabs

Product Details
VT-HP
VT-HP
VT-HP
VT-HP
VT-HP with DT300 Dispensing Tool
VT-HP with DT300 Dispensing Tool

VT-HP® is a high-performance fast cure vinylester resin-based chemical anchor developed for anchoring applications in cracked and non-cracked concrete 20MPa to 50MPa and qualified for use in seismic regions (performance categories C1/C2).

Material
  • Vinylester

Base Material

  • Normal and Lightweight Concrete (cracked and non-cracked)
  • Grout-filled and Hollow Concrete Block (when used with screen tubes)
  • Certain un-reinforced masonry applications

 

Features & Benefits
  • Suitable for use in cracked and non-cracked concrete M8 to M30 / rebar Ø8 to Ø32
  • Qualified for use in seismic performance categories C1 and C2
  • Styrene free, low odour for safe use in confined spaces - VOC Compliant (A+ rating)
  • Excellent for use in cold weather conditions or applications where fast cure is required
  • Can be used in dry and damp conditions, wet or flooded environments (not sea water)
  • Fire rated 
  • Fits 300ml standard caulking gun or DT300 by Simpson Strong-Tie, easy to dispense
Installation

Note: Refer to product label for hole and cartridge preparation, installation and technical data.

Applications
  • Structural Steel
  • Steel Columns and Beams, Post Bases, Concrete Columns
  • Balcony Extensions
  • Post-installed rebar applications
  • Threaded Rod Anchoring
  • Facades, Safety Barriers
  • Fences, Gates, Industrial Garage and Warehouse applications
Approvals
  • CE 1404 (meets EU safety, health or environmental requirements).
  • ETA – 19/0419 (Threaded Rod and Rebar Concrete)
  • ETA – 19/0765 (Threaded Rod Masonry)
  • Fire Rated (R120)
  • WRAS Approved Material (Approved for use with Potable drinking water* approval no. 1811567)
Model No. Table

Model No.

Description

Size

Box Qty

VT-HP300GREY

Fast cure vinylester anchoring adhesive (with C1 and C2 ETA Approvals)

(Includes 2 mixing nozzles — MN1)

300ml

12

DT300

Manual dispensing tool for 300ml cartridges. See product here.

—

1

MN1-RP10

Suit 300ml Epoxy Adhesives, Pack of 10. See product here.

—

10

 

Specifications

 

VT-HP Curing Schedule for Concrete and Masonry - Maximum working time and minimum curing time

Concrete Temperature

Gelling/Working Time

Minimum Curing Time in Dry Concrete

Minimum Curing Time in Wet Concrete

- 10°C to -6°C*

90 min

24 h

x2

-5°C to -1°C*

90 min

14 h

x2

0°C to +4°C*

45 min

7 h

x2

+5°C to +9°C

25 min

2 h

x2

+10°C to +19°C

15 min

80 min

x2

+20°C to +29°C

6 min

45 min

x2

+30°C to +34°C

4 min

25 min

x2

+35°C to +40°C

2 min

20 min

x2

+40°C

1,5 min

15 min

x2
  1. *Resin temperature must be at least 15 Degree’s Celsius
  2. *All specifications based on supplied mixer
  3. *Full cure time is 24 hours for dry conditions
  4. *In wet concrete the curing time must be doubled
Brochures & Catalogues

Brochures and Catalogues

PDF icon Flyer - VT-HP High Performance Chemical AnchorPDF icon Flyer - Engineered Structural Connections
Technical Data & Docs

Technical Data Sheets

PDF icon Technical Data Sheet - VT-HP

Report

PDF icon ETA-19-0419 (Threaded Rod and Rebar Concrete)PDF icon ETA-19-0765 (Threaded Rod Masonry)PDF icon WRAS Approval #1811580PDF icon DOP-e19-0765PDF icon Fire Report (R120)

Warranty

Warranty

MSDS

PDF icon MSDS - VT-HP
Masterspec
Alternative Products

Alternative Products

AT-HP BLUE

AT-HP BLUE Fast Cure Chemical Anchor

Fast Cure Chemical Anchor With Colour Change Technology.

SET-XP

SET-XP High-Strength Epoxy Anchoring Adhesive

SET-XP Epoxy Anchoring Adhesive is a high-strength formula for anchoring and doweling in cracked and uncracked concrete and masonry applications.

Titen HD Heavy Duty Screw Anchor - Concrete & Masonry

THD Titen HD Heavy Duty Screw Anchor - Concrete & Masonry

Titen HD® Heavy Duty Screw Anchor is the original high-strength screw anchor for use in cracked and uncracked concrete, as well as uncracked masonry. The Titen HD® demonstrates industry-leading performance.

THD12150WHMG

THDWH Titen HD Heavy Duty Screw Anchor with Washer Head

The Titen HD Washer Head is a high-strength screw anchor for use in cracked and uncracked concrete, as well as masonry.

Inspiration

Inspiration

VT-HP_Application.jpg

VT-HP_Application_02.jpg

VT-HP_Application_03.jpg

VT-HP_Application_04.jpg

VT-HP_Application_05.jpg

Request a Demo

Request a Demo/Sample

Experience the innovation design of Simpson Strong-Tie's products and how we can help you build safer, stronger structures. Please fill out your details and submit the form below. We’ll be in touch to schedule a time to talk and give you a personal demo of Simpson Strong-Tie products.

* Start typing address and select from the autocomplete.

Privacy policy

Request a Demo/Sample

Experience the innovation design of Simpson Strong-Tie's products and how we can help you build safer, stronger structures. Please fill out your details and submit the form below. We’ll be in touch to schedule a time to talk and give you a personal demo of Simpson Strong-Tie products.

* Start typing address and select from the autocomplete.

Privacy policy

Structural Connections

 

Unmatched Quality from the Truss to the Foundation

With nearly 60 years of field and R&D experience, Simpson Strong-Tie® timber connectors are manufactured to the industry's highest standards. From framing angles to straps to heavy-duty joist hangers, we offer the most diverse product line so that you have the right product for the job.

Simpson Strong-Tie® connectors offer unmatched quality with laboratory and field testing, and are backed by our uncompromising commitment to customer service. As the company that built the connector industry, you can count on Simpson Strong-Tie® to work closely with builders, engineers and building officials to deliver innovative, building code-compliant solutions to help build safer, stronger structures economically. Download the Timber Connectors NZS 3604 Catalogue.

Timber Connectors

From testing to service to availability, everything we do is engineered to ensure your project's success. With every product, you know you are getting the quality, value, service and on-time delivery that we have built our reputation on for the past 60 years.

From straps and ties to joist hangers and much more, Simpson Strong-Tie® structural connectors increase the strength and safety of timber-frame structures. Each connector is unique to Simpson Strong-Tie and is designed for specific applications without the need to adapt metal plating to suit a connection. Download the Timber Construction Connectors Catalogue (2016-2018).

Steel Frame Connectors

From fully tested and engineered connectors and clips Simpson Strong-Tie® provides comprehensive structural solutions for cold-formed steel construction. From steel-to-steel connections to full-scale lateral solutions and curtain wall connectors, we remain committed to developing new technology that helps to advance the cold-formed steel industry.

Find out how Simpson Strong-Tie timber connectors can help you build the right way every day. Download the Cold-Fromed Steel Construction Connectors Catalogue.