To the top

New Zealand International

Product Tabs

Product Details
BC4Z
BC4Z
BC4SS Stainless Steel
BC4SS Stainless Steel
BC4 Illustration
BC4 Illustration
BC6 Illustration
BC6 Illustration

Post caps connect tops of posts to members for a secure connection and are ideal for new or retrofit applications where structural support is needed. The BC Post Cap allows for the connection of 90mm or 140mm beam to post. Double-shear nailing between beam and post gives added strength. 

Please check the Corrosion Information to see if it is suitable for your application.

Material

Carbon Steel 1.3mm thick

Finish
  • ZMAX® Galvanised: BC4Z; BC6Z 
  • 316 Stainless Steel: BC4SS; BC6SS
Features & Benefits
  • Easy to install
  • Suits 90 mm square post and 90mm beam or 140mm square post and 140mm beam
  • Stronger than toenailing or screw fastening
  • Reduces the chance of the post splitting and eliminates nailing into end grain
  • Great for use on patios and decks
  • Compatible with Strong-Drive®SD Connector Screws
  • Available in 316 Stainless Steel for more corrosive environments such as coastal areas
Installation
  • Use all specified fasteners
  • Do not install bolts into pilot holes
  • Install with 64mm x 3.75mm nails or Strong-Drive® SD Connector Screws
  • Post bases do not provide adequate resistance to prevent members 
  • from rotating about the base and therefore are not recommended for non-top-supported installations (such as fences or unbraced carports)
  • To tie multiple 2x members together, the Designer must determine the fasteners required to join members to act as one unit without splitting the wood
Model No. Table

Model No.

Dimensions (mm)

Fasteners (No. – Length x Dia., mm)

Australia

New Zealand

W1

W2

L1

L2

H1

H2

Beam Flange

Post Flange

Uplift 

k1 = 1.14

Lateral

k1 = 1.14

Uplift 

k1 = 1.0

Lateral

k1 = 1.0

BC4Z

90

90

73

73

76

76

6 – 64x3.75

3.8

4.1

3.8

4.1

BC4SS

6 – 64x3.75 SCNR

6 – 64x3.75 SCNR

BC6Z

140

140

111

111

86

86

12 – 64x3.75

12 – 64x3.75

4.4

8.7

4.4

8.7

BC6SS

12 – 64x3.75 SCNR

12 – 64x3.75 SCNR

  1. Design Capacity is the lesser of (1) the Characteristic Capacity multiplied by the Australian Capacity Factor, or the NZ Strength Reduction Factor (φ), and applicable the k modification factors following AS 1720.1 and NZS 3603 and (2) the Serviceability Capacity which is the load at 3.2 mm joint slip. Design Capacity is the minimum of test data and structural joint calculation
  2. For Australia, the Capacity Factor (φ) is 0.85 for nails and screws for structural joints in a Category 1 application. Reduce tabulated values where other Category applications govern. For NZ, the Strength Reduction Factor (f) is 0.80 for nails in lateral loading.
  3. Duration of Load Factor (k1) is as shown. Reduce Duration of Load Factor where applicable. Capacities may not be increased.
  4. Timber species for joint design is seasoned Radiata Pine, which is Australia Joint Group JD4 per AS 1720.1 Table H2.4 and New Zealand Joint Group J5 per NZS 3603 Table 4.1.
  5. Allowable loads have been increased for wind or earthquake with no further increase allowed; reduce where other loads govern.
  6. Structural composite timber columns have sides that show either the wide face or the edges of the timber strands/veneers. Values in the tables reflect installation into the wide face.
  7. Base design loads assumes nails have full penetration into supporting member. Loads do not apply to end grain post installations.
  8. Simpson Strong-Tie® SCNR Ring Shank 64x3.75 mm nails shall be used with the BCSS models.
  9. The Design Capacities shall be multiplied by 1.10 when 75 x 3.75 mm nails are used instead of the specified 64 x 3.75 mm nails.
  10. Post and beam may consist of multiple members provided they are connected independently of the post cap fasteners.
  11. Nails and Strong-Drive SD Connector screws may not be combined in a connection.
Brochures & Catalogues
Installation Guides

Installation Guides

PDF icon BC Post Cap Installation Guides
Technical Data & Docs

Technical Data Sheets

PDF icon Technical Data Sheet - BC

Warranty

Warranty

CAD Library
Masterspec
Alternative Products

Alternative Products

LCE

Post caps connect tops of posts to members for a secure connection and are ideal for new or retrofit applications where structural support is needed. The LCE is designed to provide a connection when the end of a beam bears on a post.

Inspiration
Request a Demo

Request a Demo/Sample

Experience the innovation design of Simpson Strong-Tie's products and how we can help you build safer, stronger structures. Please fill out your details and submit the form below. We’ll be in touch to schedule a time to talk and give you a personal demo of Simpson Strong-Tie products.

Request a Demo/Sample

Experience the innovation design of Simpson Strong-Tie's products and how we can help you build safer, stronger structures. Please fill out your details and submit the form below. We’ll be in touch to schedule a time to talk and give you a personal demo of Simpson Strong-Tie products.

Structural Connections

 

Unmatched Quality from the Truss to the Foundation

With nearly 60 years of field and R&D experience, Simpson Strong-Tie® timber connectors are manufactured to the industry's highest standards. From framing angles to straps to heavy-duty joist hangers, we offer the most diverse product line so that you have the right product for the job.

Simpson Strong-Tie® connectors offer unmatched quality with laboratory and field testing, and are backed by our uncompromising commitment to customer service. As the company that built the connector industry, you can count on Simpson Strong-Tie® to work closely with builders, engineers and building officials to deliver innovative, building code-compliant solutions to help build safer, stronger structures economically. Download the Timber Connectors NZS 3604 Catalogue.

Timber Connectors

From testing to service to availability, everything we do is engineered to ensure your project's success. With every product, you know you are getting the quality, value, service and on-time delivery that we have built our reputation on for the past 60 years.

From straps and ties to joist hangers and much more, Simpson Strong-Tie® structural connectors increase the strength and safety of timber-frame structures. Each connector is unique to Simpson Strong-Tie and is designed for specific applications without the need to adapt metal plating to suit a connection. Download the Timber Construction Connectors Catalogue (2016-2018).

Steel Frame Connectors

From fully tested and engineered connectors and clips Simpson Strong-Tie® provides comprehensive structural solutions for cold-formed steel construction. From steel-to-steel connections to full-scale lateral solutions and curtain wall connectors, we remain committed to developing new technology that helps to advance the cold-formed steel industry.

Find out how Simpson Strong-Tie timber connectors can help you build the right way every day. Download the Cold-Fromed Steel Construction Connectors Catalogue.