The Strong‑Drive® SD Connector Screw is used with our connectors.
The Strong‑Drive® SDS Heavy Duty Connector Screw is a 6.4mm diameter structural wood screw ideal for various connector installations as well as timber-to-timber applications.
Strong‑Drive® connectors have been designed and tested with specific types of nails, which are generally referred to as Structural Connector Nails (SCN).
Strong‑Drive® connectors have been designed and tested with specific types of nails, which are generally referred to as Structural Connector Nails (SCN).
The CCN64 Collated Connector Nailer helps to ensure the correct installation of connectors through its unique design and is considerably faster than traditional hand nailing.
CNA Ring-Shank Connector Nail is tested and approved for use with Simpson Strong-Tie joist hangers, brackets, straps and nail plates.
The CSA is a self-drilling Flat Head screw with a Type-17 Point tip suitable for installing construction connectors to timber structures.
The Strong‑Drive® SDWC Truss Screw provides a truss and rafter-to-top plate connection as well as a method to fasten stud-to-top and bottom plate.
The Strong‑Drive® SDWS is the 2nd generation structural screw, redesigned with a patented SawTooth™ Point.
The A21 and A23 Reinforced Angle Brackets provide a way to make a straight angle of 90° connection. The A21, A23 L shape angles are load rated, providing the correct thickness and number of fasteners.
The versatile A34 and A35 Reinforced Angle Brackets provide a way to make a straight angle of 90° connection. The A35 Angle Bracket’s exclusive bending slot allows instant, accurate field bends for two and three-way ties.
E5 Reinforced Angle Bracket is suitable for structural applications in framing and timber-frame houses for general connecting of timber at 90° angles. Typical applications include fixing trusses, studs, purlins, beams and posts.
The CBT Concealed Beam Tie is part of our concealed structural connector range, which combines structural strength with invisibility.
The CJT Concealed Joist Tie is part of our concealed structural connector range, which combines structural strength with invisibility. The CJT offers tested performance in a joist connection with a clean, concealed look.
The CS Coiled Strap provides nail slots for easy installation. It can be used on the wide or narrow face of timber for light repairs or heavy-duty projects.
The DTC Roof Truss Clip is an angle bracket to handle light-duty jobs or projects where a structural connection is needed.
The STC Roof Truss Clip is an angle bracket to handle light-duty jobs or projects where a structural connection is needed.
To provide more consistent, straight corners, Simpson Strong-Tie offers a wide variety of angles in various sizes and thicknesses to handle light-duty jobs or projects where a structural connection is needed.
Hurricane Ties provide a positive connection between the truss/rafter and the wall of the structure to resist wind and seismic forces. These ties connect both solid-sawn and engineered timber across a wide range of applications.
The HTC Heavy Truss Clip ensures alignment between a roof truss and non‑bearing wall when the truss or rafter is not in contact with the top plates of the wall. Designed for applications where high lateral capacity is needed.
The RR47 Ridge Rafter Connector provides a solid connection between rafter and ridge beam. The RR47 provides alignment control and correct nailing locations.
The TC Truss Connector is designed to attach trusses or rafters to the top of walls and can allow horizontal movement up to 30mm. They are typically used at each end of the truss as determined by the Designer.
The TCP Truss Clip provides a connection between girders, trusses and rafters and top plates to provide resistance to high‑wind loads.
TJC is a versatile connector for jack trusses. Adjustable from 0 to 85 degree (shipped with 67.5 degree bend). Nail hole locations allow for easy installation.
The TP Tie Plate joins and reinforces joints with a simple, versatile solution for a wide range of connections. The TP is a nail-on tie plate, which is designed to be used back-to-back on a piece of timber without fastener interference.
The VPA Variable Pitch Connector is a versatile, field‑adjustable solution for connecting rafters to the wall top plate.
The WBT Wall Brace Tensioner is an easy‑to‑use wall strap‑brace tensioner that takes the slack out of strap bracing, saving time over other methods.
Reduce Time and Labour Cost — The Quik Drive® Advantage
Maximise your fastening efficiency on a broad range of applications from decking and siding to roofing and steel framing and everything in-between.
The Strong-Rod™ Anchor Tiedown Systems (ATS) offer safe and tested continuous rod tiedown solutions for multi-storey, timber-frame construction in seismic and high-wind areas.
Quik Fix,
Correct Angle,
Perfect Connection.
The innovative design of the LSSR Slopeable & Skewable Rafter Hanger allows it to adjust for skew up to 45° and features an innovative hinged swivel seat to adjust for up to a 45° slope on site, eliminating the need for pre‑skewed/sloped or cu
The wait is over! Quik Drive® is now available in a CORDLESS option.
Save time and money with maximum freedom, high torque and consistent performance.
The LTS Tie Down Strap provides a tension connection between two members. They resist uplift at the heel of a truss economically. The 76mm bend section eliminates interference at the transition points between steel members.
The load‑rated Strong‑Drive® SD Connector SS screw (SD SS) is a Type 316 stainless steel fastener designed, tested and approved for use with certain Simpson Strong‑Tie® stainless steel connectors.
New color-coded driver bits for easy size identification
Superior to nails in holding power and pullout resistance
Structural Connections
With nearly 60 years of field and R&D experience, Simpson Strong-Tie® timber connectors are manufactured to the industry's highest standards. From framing angles to straps to heavy-duty joist hangers, we offer the most diverse product line so that you have the right product for the job.
Simpson Strong-Tie® connectors offer unmatched quality with laboratory and field testing, and are backed by our uncompromising commitment to customer service. As the company that built the connector industry, you can count on Simpson Strong-Tie® to work closely with builders, engineers and building officials to deliver innovative, building code-compliant solutions to help build safer, stronger structures economically. Download the Timber Connectors NZS 3604 Catalogue.
Timber Connectors
From testing to service to availability, everything we do is engineered to ensure your project's success. With every product, you know you are getting the quality, value, service and on-time delivery that we have built our reputation on for the past 60 years.
From straps and ties to joist hangers and much more, Simpson Strong-Tie® structural connectors increase the strength and safety of timber-frame structures. Each connector is unique to Simpson Strong-Tie and is designed for specific applications without the need to adapt metal plating to suit a connection. Download the Timber Construction Connectors Catalogue (2016-2018).
Steel Frame Connectors
From fully tested and engineered connectors and clips Simpson Strong-Tie® provides comprehensive structural solutions for cold-formed steel construction. From steel-to-steel connections to full-scale lateral solutions and curtain wall connectors, we remain committed to developing new technology that helps to advance the cold-formed steel industry.
Find out how Simpson Strong-Tie timber connectors can help you build the right way every day. Download the Cold-Fromed Steel Construction Connectors Catalogue.
