The Strong‑Drive® SDS Heavy Duty Connector Screw is a 6.4mm diameter structural wood screw ideal for various connector installations as well as timber-to-timber applications.
The Strong‑Drive® SDWC Truss Screw provides a truss and rafter-to-top plate connection as well as a method to fasten stud-to-top and bottom plate.
The Strong‑Drive® SDWS is the 2nd generation structural screw, redesigned with a patented SawTooth™ Point.
The A21 and A23 Reinforced Angle Brackets provide a way to make a straight angle of 90° connection. The A21, A23 L shape angles are load rated, providing the correct thickness and number of fasteners.
The versatile A34 and A35 Reinforced Angle Brackets provide a way to make a straight angle of 90° connection. The A35 Angle Bracket’s exclusive bending slot allows instant, accurate field bends for two and three-way ties.
The ABU Adjustable Post Base provides a high‑strength connection between the post and concrete.
E5 Reinforced Angle Bracket is suitable for structural applications in framing and timber-frame houses for general connecting of timber at 90° angles. Typical applications include fixing trusses, studs, purlins, beams and posts.
Simpson Strong‑Tie offers a wide variety of holdown devices designed and tested to address many applications and load demands. The DTT Tension Tie & Holdown is designed for lighter‑duty holdown applications on single or double studs.
Joist hangers are designed to provide support underneath the joist, rafter or beam to provide a strong a connection. The LUS Double Shear Joist Hanger values engineering at its finest. All hangers in the LUS series have Double-Shear Nailing.
Post caps connect tops of posts to members for a secure connection and are ideal for new or retrofit applications where structural support is needed. The BC Post Cap allows for the connection of 90mm or 140mm beam to post.
The CBT Concealed Beam Tie is part of our concealed structural connector range, which combines structural strength with invisibility.
The CJT Concealed Joist Tie is part of our concealed structural connector range, which combines structural strength with invisibility. The CJT offers tested performance in a joist connection with a clean, concealed look.
The CPT Concealed Post Base Tie is part of our concealed structural connector range, which combines structural strength with invisibility. The CPT provides a clean, concealed look while providing a 25mm standoff height above concrete.
The CS Coiled Strap provides nail slots for easy installation. It can be used on the wide or narrow face of timber for light repairs or heavy-duty projects.
The DTC Roof Truss Clip is an angle bracket to handle light-duty jobs or projects where a structural connection is needed.
The STC Roof Truss Clip is an angle bracket to handle light-duty jobs or projects where a structural connection is needed.
To provide more consistent, straight corners, Simpson Strong-Tie offers a wide variety of angles in various sizes and thicknesses to handle light-duty jobs or projects where a structural connection is needed.
Hurricane Ties provide a positive connection between the truss/rafter and the wall of the structure to resist wind and seismic forces. These ties connect both solid-sawn and engineered timber across a wide range of applications.
Simpson Strong‑Tie offers a wide variety of holdown devices engineered and tested to perform and manufactured to the highest quality standards.
The HTC Heavy Truss Clip ensures alignment between a roof truss and non‑bearing wall when the truss or rafter is not in contact with the top plates of the wall. Designed for applications where high lateral capacity is needed.
Simpson Strong‑Tie offers a wide variety of holdown devices designed and tested to address many applications and load demands.
The IUC Face Fix Concealed Joist Hanger is a face‑mounted concealed flange hanger on solid timber sections. Ideal for end of ledger/header or post conditions, the IUC also provides cleaner lines for exposed conditions such as overhead decks.
The IUSE Face Fix I-Joist Hanger is a hybrid hanger that incorporates the advantages of a face mount and top mount hanger. Installation is fast with the Strong‑Grip™ seat, easy‑to‑reach face nails and self‑jigging locator tabs.
Post caps connect tops of posts to members for a secure connection and are ideal for new or retrofit applications where structural support is needed. The LCE is designed to provide a connection when the end of a beam bears on a post.
The LSC Light Staircase Stinger Connector offers a versatile, concealed connection between the stair stringer and the carrying header or boundary joist while replacing costly framing.
The MPB Moment Post Base is specifically designed to provide moment resistance for timber columns and posts.
Elegant style. Enduring strength.
The RR47 Ridge Rafter Connector provides a solid connection between rafter and ridge beam. The RR47 provides alignment control and correct nailing locations.
The SAE Face Fix Joist Hanger is a heavy-duty hanger designed for applications requiring additional strength.
The SDE Split Joist Hanger is a two‑piece, width‑adjustable joist hanger that can accommodate joist widths from 60mm and 120mm. Each SDE is comprised of one left and one right piece.
The TA Staircase Angle is a heavy duty angle bracket for connecting stair treads and stringers. It makes easier to build structurally sound stairs.
The TC Truss Connector is designed to attach trusses or rafters to the top of walls and can allow horizontal movement up to 30mm. They are typically used at each end of the truss as determined by the Designer.
The TCP Truss Clip provides a connection between girders, trusses and rafters and top plates to provide resistance to high‑wind loads.
TJC is a versatile connector for jack trusses. Adjustable from 0 to 85 degree (shipped with 67.5 degree bend). Nail hole locations allow for easy installation.
The TP Tie Plate joins and reinforces joints with a simple, versatile solution for a wide range of connections. The TP is a nail-on tie plate, which is designed to be used back-to-back on a piece of timber without fastener interference.
The VPA Variable Pitch Connector is a versatile, field‑adjustable solution for connecting rafters to the wall top plate.
The WBT Wall Brace Tensioner is an easy‑to‑use wall strap‑brace tensioner that takes the slack out of strap bracing, saving time over other methods.
The BA Top Fix I-Joist Hanger is designed to be used where a heavy load/connector is required. It is cost-effective and used for structural composite lumber and high-capacity I-joists.
The ABR255 is a hold down bracket designed for fixing CLT panels to concrete / timber floors and parapet walls. Very versatile, it is particularly resistant to shear loads thanks to its optimized geometry.
The ABR9020 and ABR105 reinforced angle brackets are designed for fixing CLT panels to timber floors and parapet walls. Reinforcing ribs provide enhanced performance.
TFLS provides the combined function of levelling and fixing the sole plate to the foundation or substructure. It comprises a universal base plate and packing pieces which can be added or removed as required.
NPB255 nail plate has been developed specifically to fix CLT panels to timber or concrete.
For a concealed connection, the ETB concealed connector comes in two parts. The first is pocketed in the header timber and fixed with nails, while the second part is fitted to the end of the beam with screws.
The innovative design of the LSSR Slopeable & Skewable Rafter Hanger allows it to adjust for skew up to 45° and features an innovative hinged swivel seat to adjust for up to a 45° slope on site, eliminating the need for pre‑skewed/sloped or cu
Timeless beauty. Tested strength.
The LTS Tie Down Strap provides a tension connection between two members. They resist uplift at the heel of a truss economically. The 76mm bend section eliminates interference at the transition points between steel members.
The load‑rated Strong‑Drive® SD Connector SS screw (SD SS) is a Type 316 stainless steel fastener designed, tested and approved for use with certain Simpson Strong‑Tie® stainless steel connectors.
Simpson Strong-Tie is the market leader in holdown brackets. The HTT4 is designed for heavy-duty holdown applications including external and internal 15kN bracewalls for concrete floors in accordance with NZS 3604:2011.
The APBO-KT decorative bottle opener is a three-piece kit that installs easily with the included screws and works well with both the Outdoor Accents Mission Collection
The AE116 s a hold down bracket designed for fixing CLT panels to concrete / timber floors and parapet walls. Very versatile, it is particularly resistant to shear loads thanks to its optimized geometry.
Computer modeling and CNC manufacturing enables glulam to be delivered to the jobsite in precise lengths and with preinstalled concealed hangers.
The MSTC is designed to resist tension loads in timber-to-timber applications. This diaphragm tension strap tie utilizes a staggered nail pattern to help minimize timber splitting.
Simpson Strong-Tie tested and load-rated tension straps and fasteners are designed to minimize cost and maximize speed and precision — while providing the strength, versatility and reliability you depend on.
Setting up a levelling post and bearers for the sub-structure of your deck can be tedious and time consuming, but not with Adjustable Bearer Support (ABS). ABS are suitable for use where decks are typically from 300mm to 600mm off the ground.
The LDSS light diaphragm spline strap is designed to be placed directly on top of CLT (cross-laminated timber) and other mass timber panels to connect them together. Unlike plywood splines, the LDSS does not require routing.
The Adjustable Joist Support has been designed specifically to enable decks to easily be built over concrete slabs in areas where limited ground clearance is available.
The Multi Purpose Support (MPS) has been designed as a mid-sized support. The MPS has excellent adjustability, along with the strength and versatility to be used with either bearer or joist combinations, or with joists on their own.
The Patio Deck Kit is designed for those areas where there is an extremely minimal step-down from the house or apartment block to your patio area.
Structural Connections
With nearly 60 years of field and R&D experience, Simpson Strong-Tie® timber connectors are manufactured to the industry's highest standards. From framing angles to straps to heavy-duty joist hangers, we offer the most diverse product line so that you have the right product for the job.
Simpson Strong-Tie® connectors offer unmatched quality with laboratory and field testing, and are backed by our uncompromising commitment to customer service. As the company that built the connector industry, you can count on Simpson Strong-Tie® to work closely with builders, engineers and building officials to deliver innovative, building code-compliant solutions to help build safer, stronger structures economically. Download the Timber Connectors NZS 3604 Catalogue.
Timber Connectors
From testing to service to availability, everything we do is engineered to ensure your project's success. With every product, you know you are getting the quality, value, service and on-time delivery that we have built our reputation on for the past 60 years.
From straps and ties to joist hangers and much more, Simpson Strong-Tie® structural connectors increase the strength and safety of timber-frame structures. Each connector is unique to Simpson Strong-Tie and is designed for specific applications without the need to adapt metal plating to suit a connection. Download the Timber Construction Connectors Catalogue (2016-2018).
Steel Frame Connectors
From fully tested and engineered connectors and clips Simpson Strong-Tie® provides comprehensive structural solutions for cold-formed steel construction. From steel-to-steel connections to full-scale lateral solutions and curtain wall connectors, we remain committed to developing new technology that helps to advance the cold-formed steel industry.
Find out how Simpson Strong-Tie timber connectors can help you build the right way every day. Download the Cold-Fromed Steel Construction Connectors Catalogue.
