To the top

New Zealand International

Home / Products / Outdoor Accents - Mission Collection

Outdoor Accents - Mission Collection

Product Tabs

Product Details
Outdoor Accents - Mission Collection
Outdoor Accents - Mission Collection
APA4 - Angle Bracket
APA4 - Angle Bracket
APA4 - Angle Bracket
APA4 - Angle Bracket
APA21 - Angle Bracket
APA21 - Angle Bracket
APA21 - Angle Bracket
APA21 - Angle Bracket
APB44 - Post Base
APB44 - Post Base
APB44 - Post Base
APB44 - Post Base
APB66 - Post Base
APB66 - Post Base
APDJT - Deck Joist Tie
APDJT - Deck Joist Tie
APDMW56 - Decorative Washer
APDMW56 - Decorative Washer
APL4 - L Strap
APL4 - L Strap
APL4 - L Strap
APL4 - L Strap
APT4 - T Strap
APT4 - T Strap
APT4 - T Strap
APT4 - T Strap
SAE Joist Hanger
SAE Joist Hanger
SAE Joist Hanger
SAE Joist Hanger
APLH - Concealed Joist Hanger
APLH - Concealed Joist Hanger
APLH - Concealed Joist Hanger
APLH - Concealed Joist Hanger
STN22 Hex Head Washer with SDWS
STN22 Hex Head Washer with SDWS
STN22 Hex Head Washer with SDWS
STN22 Hex Head Washer with SDWS
APBO Decorative Bottle Opener
APBO Decorative Bottle Opener
APBO Decorative Bottle Opener
APBO Decorative Bottle Opener
Outdoor Accents Mission Collection
Outdoor Accents Mission Collection

Elegant style. Enduring strength.

With Outdoor Accents® - Mission Collection®, a complete line of decorative timber connectors and fasteners from Simpson Strong-Tie, you can now bring both design elegance and structural strength to your outdoor living areas. This hardware accommodates 90mm and 140mm timber sizes, providing the flexibility you need when designing and building custom outdoor projects such as pergolas, patio covers and other top-supported structures. The Mission Collection® are designed with a mission-style arched profile that adds a touch of southwestern flair to your outdoor projects.

Hex-Head Washer

The Outdoor Accents® hex-head washer provides the decorative appearance of a bolted connection. Its patent design makes for an easier and significantly faster installation compared to through‑bolting. This washer and screw combination is designed specifically to fasten Outdoor Accents post bases, T and L straps, and angles. 

Structural Timber Screw

Outdoor Accents® structural timber screw is combined with the hex-head washer, the solution delivers increased strength and the decorative appeal of a bolted connection with the installation ease of a screw. The SDWS Timber Screw with patented SawTooth™ point allows for faster installation, less torque and requires no pre-drilling. The screw's bold thread design enables superior holding to attach ledgers and other secure connections. The structural screw and washer are both sold separately from the Outdoor Accents connectors.

Post Base

Outdoor Accents® post bases secure timber columns or posts to concrete, while providing a 25mm standoff height that helps minimise risk of decay and screws in lateral loading of the timber post. These bases accommodate 90mm and 140mm timber. Install with Outdoor Accents® structural timber screws and hex-head washers for a decorative look.

Deck Joist Tie

The Deck Joist Tie attaches 45mm wide joists to the side of 90mm or larger support posts. It installs quickly and easily with the Outdoor Accents® structural SDWS screw and hex head washer for the look of a bolted connection.

Strap Tie

The flat T Strap Tie and L Strap Tie bring decorative flair and lateral strength to your outdoor living space or even an indoor project. They provide reinforcement for connections where one timber piece intersects another at a 90° angle. They're designed to accommodate multiple timber sizes and to be installed with Outdoor Accents® structural timber screws and hex-head washers.

Concealed Joist Hanger

The APLH Concealed Joist Hanger is a face‑mounted concealed flange hanger solid timber sections. Ideal for end of ledger/header or post conditions, it also provides cleaner lines for pergolas.

Joist Hanger

The SAE Face Fix Joist Hanger is a heavy-duty hanger suitable for 45mm joist. Big seat for joists provides greater strength support. Installed with Outdoor Accents® black hex head connector screws.

Angle

Outdoor Accents 90 degree Angles tie together beams, rafters and more. These angles make structural connections between beams and posts stronger and provide consistent, straight corners for a variety of outdoor projects. The APA4 Angle is designed for use with 90mm or larger post; The APA21 Angle is designed for use with 45mm rafter.

Decorative Washer

The APDMW56 decorative washer installs easily with the structural SDWS Timber screw and hex‑head washer combination and can be used in a variety of timber-to-timber connections.

Connector Screw

The Outdoor Accents® connector screw reduces installation time by driving easily without predrilling. Designed for installation with the Outdoor Accents® APA21 90° angle, the screw's black finish accents any outdoor living project. The sharp point of the screw enables fast starts, and the patented serrated threads reduce torque for improved driveability.

APBO Decorative Bottle Opener

The APBO-KT decorative bottle opener is a three-piece kit that installs easily with the included screws and works well with both the Outdoor Accents Mission Collection® and Avant Collection™.

>> View Avant Collection™

Material

Carbon Steel 2mm-2.7mm thick

Finish
  • ZMAX® galvanization with a black powder coat: Connectors
  • Quik Guard® Coating: Hex-Head Washer
  • Double-Barrier black proprietary coating: Fasteners 
Features & Benefits
  • Flat T and L strap ties, Bolt-like connectors bring decorative appeal and lateral strength to your outdoor living area or even an indoor project
  • Fastener and washer create decorative bolt-like connections but install with the ease of a screw and without predrilling
  • Post bases secure timber posts to concrete, while providing a 25mm standoff height to help prevent rot from standing water and ground moisture
  • All hardware has been structural strength tested and approved, and can be used to resist wind or seismic loads
  • Black Double-Barrier Coating offers premium look while providing a medium level of corrosion protection for many outdoor applications
  • Patent hex-head washer design facilitates easy installation
Installation
  • Use all specified fasteners 
Applications
  • Pergolas
  • Patios
  • Pavilion
  • Arbours, Garden Gazebos, Garden Arches, Trellis
  • Outdoor Living, Outdoor Structures, Outdoor Decks
Approvals
  • IAPMO-UES ER-192
  • IAPMO-UES ER-280
  • ICC-ES ESR-3046
  • FL13975-R5
  • FL10865-R4
  • FL9589-R5
Model No. Table

 

Technical Data - Post Bases

Model No.

Dimensions (mm)

Fasteners Qty

Design Capacity (kN)

Box Qty

L

W

H

Column

Anchor Dia. (mm)

Australia

New Zealand

Uplift (k1=1.14)

Download (k1=0.69)

Uplift (k1=1.0)

Download (k1=0.8)

APB44

76

90

178

4

16

4.4

38.2

4.4

31.5

8

APB66

127

140

191

4

16

5.0

62.9

2.5

51.8

6
  1. Design Capacity is the lesser of (1) the Characteristic Capacity multiplied by the Australian Capacity Factor, or the NZ Strength Reduction Factor (φ), and applicable the k modification factors following AS 1720.1 and NZS 3603 and (2) the Serviceability Capacity which is the load at 3.2mm joint slip. Design Capacity is the minimum of test data and structural joint calculation.
  2. For Australia, the Capacity Factor (φ) is 0.85 for nails and screws for structural joints in a Category 1 application. Reduce tabulated values where other Category applications govern. For NZ, the Strength Reduction Factor (φ) is 0.80 for nails and screws in lateral loading.
  3. Duration of Load Factor (k1) is as shown. Reduce Duration of Load Factor where applicable. Capacities may not be increased.
  4. Timber species for joint design is seasoned Radiata Pine, which is Australia Joint Group JD4 per AS 1720.1 Table H2.4 and New Zealand timber grade SG8.
  5. Uplift loads have been increased for wind or earthquake or seismic with no further increase allowed; reduce where others govern.
  6. Downloads may not be increased for short-term loading.
  7. Specifier to design concrete for uplift capacity.
  8. Downloads shall be reduced where limited by capacity of the post.
  9. All post fasteners are a Simpson Strong-Tie® SDWS22312DB inserted through an STN22 washer.
  10. Post bases do not provide adequate resistance to prevent members from rotating about the base and therefore are not recommended for non-top-supported installations (such as fences or unbraced carports).

 

Technical Data - Deck Joist Tie

Model No.

Ga.

Dimensions (mm)

Design Capacity (kN) - Download

Box Qty

S

W

H

Australia

New Zealand

Floor (k1=0.69)

Floor (k1=0.8)

APDJT1.75-4

10

45

76

246

14.4

13.5

24
  1. Design Capacity is the lesser of (1) the Characteristic Capacity multiplied by the Australian Capacity Factor, or the NZ Strength Reduction Factor (φ), and applicable the k modification factors following AS 1720.1 and NZS 3603 and (2) the Serviceability Capacity which is the load at 3.2mm joint slip. Design Capacity is the minimum of test data and structural joint calculation
  2. For Australia, the Capacity Factor (φ) is 0.85 for nails and screws for structural joints in a Category 1 application. Reduce tabulated values where other Category applications govern. For NZ, the Strength Reduction Factor (φ) is 0.80 for nails and screws in lateral loading.
  3. Duration of Load Factor (k1) is as shown. Reduce Duration of Load Factor where applicable. Capacities may not be increased.
  4. Timber species for joint design is seasoned Radiata Pine, which is Australia Joint Group JD4 per AS 1720.1 Table H2.4 and New Zealand timber grade SG8.
  5. Design capacity is for a single part.
  6. Joist fastener is a Simpson Strong-Tie SDWS22512DB inserted through an STN22 washer.
  7. Post fastener is a Simpson Strong-Tie SDWS22312DB inserted through an STN22 washer.

 

Technical Data - Strap Ties

Model No.

Dimensions (mm)

Fasteners Qty

Design Capacity (kN)

Box Qty

W

L

H

Column

Beam

Australia

New Zealand

Uplift (k1=1.14)

F1 (k1=1.14)

Uplift (k1=1.0)

F1 (k1=1.0)

APL4

76

210

210

2

4

5.7

3.0

5.7

3.0

8

APL6

127

286

286

4

6

8.6

6.0

8.6

6.0

APT4

76

343

210

2

4

5.9

4.5

5.9

4.5

APT6

127

445

286

4

8

12.9

6.3

10.8

6.3
  1. Design Capacity is the lesser of (1) the Characteristic Capacity multiplied by the Australian Capacity Factor, or the NZ Strength Reduction Factor (φ), and applicable the k modification factors following AS 1720.1 and NZS 3603 and (2) the Serviceability Capacity which is the load at 3.2mm joint slip. Design Capacity is the minimum of test data and structural joint calculation
  2. For Australia, the Capacity Factor (φ) is 0.85 for nails and screws for structural joints in a Category 1 application. Reduce tabulated values where other Category applications govern. For NZ, the Strength Reduction Factor (φ) is 0.80 for nails and screws in lateral loading.
  3. Duration of Load Factor (k1) is as shown. Reduce Duration of Load Factor where applicable. Capacities may not be increased.
  4. Timber species for joint design is seasoned Radiata Pine, which is Australia Joint Group JD4 per AS 1720.1 Table H2.4 and New Zealand timber grade SG8.
  5. Allowable loads have been increased for wind or seismic loads with no further increase allowed.
  6. Connectors must be installed in pairs. Allowable loads do not apply to single parts.
  7. All fasteners are a Simpson Strong-Tie® SDWS22312DB inserted through an STN22 washer.

Technical Data - Joist Hanger

Model No.

Joist Size (mm)

Dimensions5 (mm)

Fasteners
(No. – Length x Dia., mm)

Design Capacity (kN)

Width

Height

W

H

B

Face

Joist

Uplift
k1 = 1.0

Download

Floor
k1 = 0.80

Roof
k1 = 0.80

SAE200/46/2PB

45

90–120

45

80

84

8 – 38 x 3.75

4 – 38 x 3.75

3.00

5.70

5.70

SAE250/46/2PB

115–150

45

100

84

12 – 38 x 3.75

7 – 38 x 3.75

5.24

6.84

6.84

 

  • Design Capacity is the lesser of (1) the Characteristic Capacity multiplied by the NZ Strength Reduction Factor φ), and applicable the k modification factors following NZS 3603 and (2) the Serviceability Capacity which is the load at 3.2mm joint slip. Design Capacity is the minimum of test data and structural joint calculation.

  • The Strength Reduction Factor (φ) is 0.80 for nails in lateral loading.

  • Duration of Load Factor (k1) is as shown. Reduce Duration of Load Factor where applicable. Capacities may not be increased.

  • Timber species for joint design is seasoned Radiata Pine, which is New Zealand Joint Group J5 per NZS 3603 Table 4.1.

  • Dimensions W, H and B are for the interior of the hanger.

 

Technical Data - Angle (2 required for APA4)

Model No.

Dimensions (mm)

Fasteners Qty

Design Capacity (kN)

Box Qty

L

W1

W2

Column

Beam

Australia

New Zealand

Uplift (k1=1.14)

F1 (k1=1.14)

Uplift (k1=1.0)

F1 (k1=1.0)

APA4

76

83

76

2

2

2.0

6.2

2.0

6.2

12

APA21

35

51

38

1

1

0.9

1.1

0.9

1.1

90
  1. Design Capacity is the lesser of (1) the Characteristic Capacity multiplied by the Australian Capacity Factor, or the NZ Strength Reduction Factor (φ), and applicable the k modification factors following AS 1720.1 and NZS 3603 and (2) the Serviceability Capacity which is the load at 3.2mm joint slip. Design Capacity is the minimum of test data and structural joint calculation. 
  2. For Australia, the Capacity Factor (φ) is 0.85 for nails and screws for structural joints in a Category 1 application. Reduce tabulated values where other Category applications govern. For NZ, the Strength Reduction Factor (φ) is 0.80 for nails and screws in lateral loading. 
  3. Duration of Load Factor (k1) is as shown. Reduce Duration of Load Factor where applicable. Capacities may not be increased. 
  4. Timber species for joint design is seasoned Radiata Pine, which is Australia Joint Group JD4 per AS 1720.1 Table H2.4 and New Zealand timber grade SG8. 
  5. Allowable loads have been increased for wind or seismic loads with no further increase allowed. 
  6. For APA4, connectors must be installed in pairs. Allowable loads do not apply to single parts. 
  7. For APA21 - Allowable loads are for a single part. 
  8. All fasteners for APA4 are a Simpson Strong-Tie® SDWS22312DB inserted through an STN22 washer.
  9. All fasteners for APA21 are a Simpson Strong-Tie® SD#10x38.

 

Technical Data - Concealed Joist Hanger

Model No.

Joist Size (mm)

Dimensions (mm)

Fasteners Qty

Design Capacity (kN)

Box Qty

Width

Height

W

H

B

Face

Joist

Australia

New Zealand

Uplift (k1=1.14)

F1 (k1=0.69)

Uplift (k1=1.0)

F1 (k1=0.8)

APLH45140

45

140-190

46

130

49

6

4

6.4

8.4

5.3

7.7

24

APLH45240

240-290

46

200

49

10

6

9.0

13.5

7.4

13.2

12
  1. Design Capacity is the lesser of (1) the Characteristic Capacity multiplied by the Australian Capacity Factor, and applicable the k modification factors following AS 1720.1 or the NZ Strength Reduction Factor (φ), and applicable the k modification factors following NZS 3603 and (2) the Serviceability Capacity which is the load at 3.2mm joint slip. Design Capacity is the minimum of test data and structural joint calculation.
  2. For Australia, the Capacity Factor (φ) is 0.85 for screws for structural joints in a Category 1 application. Reduce tabulated values where other Category applications govern. For NZ, the Strength Reduction Factor (φ) is 0.80 for nails in lateral loading.
  3. Duration of Load Factor (k1) is as shown. Reduce Duration of Load Factor where applicable. Capacities may not be increased.
  4. Timber species for joint design is seasoned Radiata Pine, which is Australia Joint Group JD4 per AS 1720.1 Table H2.4 and New Zealand Joint Group J5 per NZS 3603 Table 4.1.
  5. Dimensions W, H and B are for the interior of the hanger.
  6. All fasteners are a Simpson Strong-Tie® SD10112DBB #10x38.

 

Technical Data - Connector Screws

Model No.

Size

Thread Length
(mm)

Timber Side Member (mm)

Characteristic Withdrawal Value (N/mm)

Box Qty

Australia

New Zealand

JD4

JD5

SG8

SG6

SD10112DBB

#10 x 38mm

25

38

101

71

139

97

5 Packs
(50 per clamshell)
  1. Characteristic values are for connections between two members with full thread penetration into the main member.
  2. Characteristic values are based on installation into the side grain of the timber with the screw axis perpendicular to the face of the member.
  3. The main and side members shall be sawn timber or structural composite timber with the specific gravity or equivalent specific gravity typical of JD4 and JD5 for Australia or SG8 and SG6 for New Zealand.
  4. For design values, apply appropriate capacity factor.
  5. Design values shall be multiplied by applicable adjustment factors from AS 1720.1 or NZS 3603.

 

Technical Data - Decorative Washer

Model No.

Thickness

Hole Dia.

W

APDMW56

2.7 mm

15 mm

76 mm

 

  1. Fastener is SDWS22312DBB or SDWS22512DBB, inserted through an STN22 washer.

 

Technical Data - Hex-Head Washer

Model No.

Diameter

Box Qty

Ctn Qty

STN22-R8

38 mm

8

10

 

  1. Combined with the Outdoor Accents structural timber screws - SDWS22312DBB or SDWS22512DBB

 

Technical Data - Structural Timber Screw and Hex-Head Washer

Model No.

Hex-Head Washer

Screw Length (mm)

Thread Length (mm)

Timber Side Member (mm)

Characteristic Lateral Value, QKL (N)

Carton Qty

Australia

New Zealand

JD4

JD5

JD6

SG8

SG6

SDWS22312DBBRC12

STN22-R8

89

51

38

3475

2840

2660

3460

3145

10 Packs
(12 per clamshell)

SDWS22312DBB-R50

6 Packs
(50 per box)

SDWS22512DBBRC12

140

70

6930

6400

3910

9140

8580

10 Packs
(12 per clamshell)
  1. Characteristic values are for connections between two members with full thread penetration into the main member.
  2. Characteristic values are based on installation into the side grain of the timber with the screw axis perpendicular to the face of the member.
  3. The main and side members shall be sawn timber or structural composite timber with the specific gravity or equivalent specific gravity typical of JD4, JD5 and JD6 for Australia or SG8 and SG6 for New Zealand.
  4. For design values, apply appropriate capacity factor.
  5. Design values shall be multiplied by applicable adjustment factors from AS 1720.1 or NZS 3603.
 
Brochures & Catalogues

Brochures and Catalogues

PDF icon Flyer - Outdoor Accents Mission CollectionPDF icon Catalogue - Timber Connectors NZS 3604PDF icon Flyer - APBO Bottle Opener
Technical Data & Docs

Technical Data Sheets

PDF icon Technical Data Sheet - Mission Collection

Report Links

ER-192
ER-280
FL10865
FL13975
FL9589-R5
ESR-3046

Warranty

Warranty

CAD Library

Download

jpg: 
Image icon APA4_Detail_Post-to-Beam Installation.jpg
dxf: 
Binary Data APA4_Detail_Post-to-Beam Installation.dxf
dwg: 
File APA4_Detail_Post-to-Beam Installation.dwg
PDF: 
PDF icon APA4_Detail_Post-to-Beam Installation.pdf

Download

jpg: 
Image icon APA21_Detail_Joist-to-Rafter Installation.jpg
dxf: 
Binary Data APA21_Detail_Joist-to-Rafter Installation.dxf
dwg: 
File APA21_Detail_Joist-to-Rafter Installation.dwg
PDF: 
PDF icon APA21_Detail_Joist-to-Rafter Installation.pdf

Download

jpg: 
Image icon APB44_Detail_Post Base Connection.jpg
dxf: 
Binary Data APB44_Detail_Post Base Connection.dxf
dwg: 
File APB44_Detail_Post Base Connection.dwg
PDF: 
PDF icon APB44_Detail_Post Base Connection.pdf

Download

jpg: 
Image icon APB66_Detail_Post Base Connection.jpg
dxf: 
Binary Data APB66_Detail_Post Base Connection.dxf
dwg: 
File APB66_Detail_Post Base Connection.dwg
PDF: 
PDF icon APB66_Detail_Post Base Connection.pdf

Download

jpg: 
Image icon APDJT_Detail_Joist-to-Post Connection.jpg
dxf: 
Binary Data APDJT_Detail_Joist-to-Post Connection.dxf
dwg: 
File APDJT_Detail_Joist-to-Post Connection.dwg
PDF: 
PDF icon APDJT_Detail_Joist-to-Post Connection.pdf

Download

jpg: 
Image icon APL4_Detail_Post-to-Beam Corner Installation.jpg
dxf: 
Binary Data APL4_Detail_Post-to-Beam Corner Installation.dxf
dwg: 
File APL4_Detail_Post-to-Beam Corner Installation.dwg
PDF: 
PDF icon APL4_Detail_Post-to-Beam Corner Installation.pdf

Download

jpg: 
Image icon APT4_Detail_Post-to-Beam Installation.jpg
dxf: 
Binary Data APT4_Detail_Post-to-Beam Installation.dxf
dwg: 
File APT4_Detail_Post-to-Beam Installation.dwg
PDF: 
PDF icon APT4_Detail_Post-to-Beam Installation.pdf

Download

jpg: 
Image icon STN22 & SDWS_Detail_Timber Brace Connection with Beam.jpg
dxf: 
Binary Data STN22 & SDWS_Detail_Timber Brace Connection with Beam.dxf
dwg: 
File STN22 & SDWS_Detail_Timber Brace Connection with Beam.dwg
PDF: 
PDF icon STN22 & SDWS_Detail_Timber Brace Connection with Beam.pdf

Download

jpg: 
Image icon STN22 & SDWS_Detail_Timber Brace.jpg
dxf: 
Binary Data STN22 & SDWS_Detail_Timber Brace.dxf
dwg: 
File STN22 & SDWS_Detail_Timber Brace.dwg
PDF: 
PDF icon STN22 & SDWS_Detail_Timber Brace.pdf

Download

jpg: 
Image icon APLH_Detail_Joist-to-Beam_Installation.jpg
dxf: 
Binary Data APLH_Detail_Joist-to-Beam_Installation.dxf
dwg: 
File APLH_Detail_Joist-to-Beam_Installation.dwg
PDF: 
PDF icon APLH_Detail_Joist-to-Beam_Installation.pdf

Download

jpg: 
Image icon SAE_Detail_Joist_Installation.jpg
dxf: 
Binary Data SAE_Detail_Joist_Installation.dxf
dwg: 
File SAE_Detail_Joist_Installation.dwg
PDF: 
PDF icon SAE_Detail_Joist_Installation.pdf
Package icon Download Full Set (5.5 MB)
Masterspec
Alternative Products

Alternative Products

Outdoor Accents - Avant Collection

Outdoor Accents - Avant Collection

Timeless beauty. Tested strength.

CPT44Z

CPT Concealed Post Base Tie

The CPT Concealed Post Base Tie is part of our concealed structural connector range, which combines structural strength with invisibility. The CPT provides a clean, concealed look while providing a 25mm standoff height above concrete.

CJT3ZS

CJT Concealed Joist Tie

The CJT Concealed Joist Tie is part of our concealed structural connector range, which combines structural strength with invisibility. The CJT offers tested performance in a joist connection with a clean, concealed look.

CBT2Z

CBT Concealed Beam Tie

The CBT Concealed Beam Tie is part of our concealed structural connector range, which combines structural strength with invisibility.

Inspiration

Inspiration

How To Build A Pergola with Outdoor Accents - Mission Collection

Outdoor_Application_01.jpg

Outdoor_Application_02.jpg

Outdoor_Application_02-2.jpg

Outdoor_Application_03.jpg

Outdoor_Application_04.jpg

Outdoor_Application_05.jpg

Outdoor_Application_06.jpg

Outdoor_Application_07.jpg

Outdoor_Application_08.jpg

Outdoor_Application_09.jpg

Outdoor_Application_09-2.jpg

Outdoor_Application_10.jpg

Outdoor_Application_11.jpg

Outdoor_Application_12.jpg

Outdoor_Application_13.jpg

Outdoor_Application_14.jpg

Outdoor_Application_14-2.jpg

Outdoor_Application_15.jpg

Outdoor_Application_16.jpg

Outdoor_Application_17.jpg

Outdoor_Application_18.jpg

Outdoor_Application_19.jpg

Outdoor_Application_20.jpg

Outdoor_Application_21.jpg

Outdoor_Application_22.jpg

Outdoor_Application_23.jpg

Request a Demo

Request a Demo/Sample

Experience the innovation design of Simpson Strong-Tie's products and how we can help you build safer, stronger structures. Please fill out your details and submit the form below. We’ll be in touch to schedule a time to talk and give you a personal demo of Simpson Strong-Tie products.

* Start typing address and select from the autocomplete.

Privacy policy

Request a Demo/Sample

Experience the innovation design of Simpson Strong-Tie's products and how we can help you build safer, stronger structures. Please fill out your details and submit the form below. We’ll be in touch to schedule a time to talk and give you a personal demo of Simpson Strong-Tie products.

* Start typing address and select from the autocomplete.

Privacy policy

Structural Connections

 

Unmatched Quality from the Truss to the Foundation

With nearly 60 years of field and R&D experience, Simpson Strong-Tie® timber connectors are manufactured to the industry's highest standards. From framing angles to straps to heavy-duty joist hangers, we offer the most diverse product line so that you have the right product for the job.

Simpson Strong-Tie® connectors offer unmatched quality with laboratory and field testing, and are backed by our uncompromising commitment to customer service. As the company that built the connector industry, you can count on Simpson Strong-Tie® to work closely with builders, engineers and building officials to deliver innovative, building code-compliant solutions to help build safer, stronger structures economically. Download the Timber Connectors NZS 3604 Catalogue.

Timber Connectors

From testing to service to availability, everything we do is engineered to ensure your project's success. With every product, you know you are getting the quality, value, service and on-time delivery that we have built our reputation on for the past 60 years.

From straps and ties to joist hangers and much more, Simpson Strong-Tie® structural connectors increase the strength and safety of timber-frame structures. Each connector is unique to Simpson Strong-Tie and is designed for specific applications without the need to adapt metal plating to suit a connection. Download the Timber Construction Connectors Catalogue (2016-2018).

Steel Frame Connectors

From fully tested and engineered connectors and clips Simpson Strong-Tie® provides comprehensive structural solutions for cold-formed steel construction. From steel-to-steel connections to full-scale lateral solutions and curtain wall connectors, we remain committed to developing new technology that helps to advance the cold-formed steel industry.

Find out how Simpson Strong-Tie timber connectors can help you build the right way every day. Download the Cold-Fromed Steel Construction Connectors Catalogue.